The ZebraLight SC80w runs on one AA battery or one CR123A battery, you choose. The SC80w has a
Neutral White LED, which differs from the Cool White of the SC80. It has three selectable modes and each mode can be configured to one of the two sub-levels. This EDC friendly light has a removable pocket clip.
Features:
Side click electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness levels
Precision machined casing from premium grade Alcoa aluminum bar stock
Durable natural hard anodized finish (Type III Class I)
Ultra clear lens with anti-reflection coatings on both sides
Orange peel textured reflector
Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
Waterproof to IPX8 (2 meters, 30 minutes)
Levels of Output (using Panasonic CR123A):
High: H1 189 lumens (1.2 hrs); H2 77 lumens (4.2 hrs) / 4Hz Strobe
Medium: M1 34 lumens (10 hrs); M2 10 lumens (28 hrs)
Low: L1 2.1 lumens (4.2 days); L2 0.10 lumens (43 days)
*Tested using Panasonic CR123A battery
Levels of Output (using Sanyo 2000mAH Eneloop):
High: H1 172 lumens (0.9 hrs); H2 77 lumens (2.6 hrs) / 4Hz Strobe
Medium: M1 34 lumens (7 hrs); M2 10 lumens (23 hrs)
Low: L1 2.1 lumens (3 days); L2 0.10 lumens (29 days)
*Tested using Panasonic CR123A battery
Specifications:
LED: Cree XP-G Neutral White (norminal CCT 4200K)
Beam Type: 80 degree spill beam spread; 9 degree hot spot
Overall Length: 3.20" (81.6 mm)
Diameter: 0.94" (23.9 mm)
Weight: 1.9 oz. (55 gram) with clip, w/out battery
One CR123A lithium primary or one 1.5V AA (NiMH, lithium or alkaline). Batteries are not included in the package. Unprotected 14500s or 16340s may be used but the performance/runtimes/functions are unknown. Protected 14500s or 16340s may not fit.
Included Accessories: Two o-rings.
Information from ZebraLight
